描述 Description

The Allegro ACS759 family of current sensor ICs provides economical and precise solutions for AC or DC current sensing. Typical applications include motor control, load detection and management, power supply and DC-to-DC converter control, inverter control, and overcurrent fault detection.

The device consists of a precision, low-offset linear Hall circuit with a copper conduction path located near the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional output voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy at the factory.

High level immunity to current conductor dV/dt and stray electric fields, offered by Allegro proprietary integrated shield technology, guarantees low output voltage ripple and low offset drift in high-side, high voltage applications.

The output of the device has a positive slope (>VCC/2) when an increasing current flows through the primary copper conduction path (from terminal 4 to terminal 5), which is the path used for current sampling. The internal resistance of this conductive path is 100?μΩ typical, providing low power loss.

The thickness of the copper conductor allows survival of the device at high overcurrent conditions. The terminals of the conductive path are electrically isolated from the signal leads (pins 1 through 3). This allows the ACS759 family of sensor ICs to be used in applications requiring electrical isolation without the use of opto-isolators or other costly isolation techniques.

The device is fully calibrated prior to shipment from the factory. The ACS759 family is lead (Pb) free. All leads are plated with 100% matte tin, and there is no Pb inside the package. The heavy gauge leadframe is made of oxygen-free copper.

These parts are in production but have been determined to be NOT FOR NEW DESIGN. This classification indicates that sale of this device is currently restricted to existing customer applications. The device should not be purchased for new design applications because obsolescence in the near future is probable. Samples are no longer available. Date of status change: June 5, 2017Recommended Substitutions: For existing customer transition, and for new customers or new applications,use ACS773.

特性 Features

? Industry-leading noise performance through proprietary amplifier and filter design techniques
? Integrated shield greatly reduces capacitive coupling from current conductor to die due to high dV/dt signals, and prevents offset drift in high-side, high voltage applications
? Total output error improvement through gain and offset trim over temperature
? Small package size, with easy mounting capability
? Monolithic Hall IC for high reliability
? Ultra-low power loss: 100?μΩ internal conductor resistance
? Galvanic isolation allows use in economical, high-side current sensing in high voltage systems
? 3.0 to 3.6?V, single supply operation
? 120?kHz typical bandwidth
? 3?μs output rise time in response to step input current
? Output voltage proportional to AC or DC currents
? Factory-trimmed for accuracy
? Extremely stable output offset voltage
? Nearly zero magnetic hysteresis

簡介

ACS759屬于傳感器變送器的電流傳感器。由制造生產的ACS759電流傳感器電流傳感器用于檢測并響應電線或電路中的電流變化。傳感器類型包括電流開關式、磁通門式、霍爾效應式、電流指示器、電流傳感器、磁調制器、磁阻式和變壓器式（帶調節功能），電流檢測范圍可編程設置在 5mA 至 2500A 之間，可用于測量交流或直流電流。