描述 Description

The Allegro ACS726 current sensor IC family provideseconomical and precise solutions for AC current sensing inindustrial, commercial, and communications systems. Thedevice package allows for easy implementation by the customer.Typical applications include motor control, load detection andmanagement, switched-mode power supplies, and overcurrentfault protection.

The fully differential output gives superior immunity to outputoffset drift as well common mode noise.

ACS726 is the first current sensor IC to include a fullydifferential back-end amplifier (BEA) that can be used to adjustgain and bandwidth via external RC networks. The BEA isfully independent and when unused, it can be powered downto reduce power consumption.

The device consists of a precise, low-offset, linear Hallsensor circuit with a copper conduction path located near thesurface of the die. Applied current flowing through this copperconduction path generates a magnetic field which is sensedby the integrated Hall IC and converted into a proportionalvoltage. Device accuracy is optimized through the closeproximity of the magnetic field to the Hall transducer. A precise,proportional voltage is provided by the low-offset, chopper-stabilizedBiCMOS Hall IC, which is programmed for accuracyafter packaging. The output of the device has a positive differentialvoltage (VOUTP – VOUTN) when an increasing current flows throughthe primary copper conduction path (from pins 1 through 6, to pins7 through 12), which is the path used for current sensing. The internalresistance of this conductive path is 1.1?mΩ typical, providing lowpower loss.

The terminals of the conductive path are electrically isolated fromthe sensor IC signal leads (pins 13 through 24). This allows theACS726 current sensor IC to be used in high-side current senseapplications without the use of high-side differential amplifiers orother costly isolation techniques.

The ACS726 is provided in a small, low-profile surface mountQSOP24 package (suffix LF). The leadframe is plated with 100%matte tin, which is compatible with standard lead (Pb) free printedcircuit board assembly processes. Internally, the device is Pb-free,except for flip-chip high-temperature Pb-based solder balls, currentlyexempt from RoHS. The device, excluding the BEA, is fully calibratedprior to shipment from the factory.

特性 Features

? Fully differential architecture for improved immunity to offset drift and common mode noise
? Spare differential back end amplifier for externally adjustable gain and bandwidth using simple RC networks
? Greatly improved bandwidth through proprietary amplifier and filter design techniques
? High bandwidth 120?kHz analog output
? Patented integrated digital temperature compensation circuitry allows nearly closed-loop accuracy, through entire temperature range, in an open loop sensor
? 1.1?mΩ primary conductor resistance for low power loss and high inrush current withstanding capability
? Small footprint, low-profile QSOP24 package suitable for space-constrained applications
? Integrated shield virtually eliminates capacitive coupling from current conductor to die due to high dV/dt voltage transients
? 3 to 3.6?V, single supply operation
? Factory-trimmed sensitivity and quiescent output voltage for improved accuracy
? Chopper stabilization results in extremely stable quiescent output voltage
? Ratiometric output from supply voltage

簡介

ACS726屬于傳感器變送器的電流傳感器。由制造生產的ACS726電流傳感器電流傳感器用于檢測并響應電線或電路中的電流變化。傳感器類型包括電流開關式、磁通門式、霍爾效應式、電流指示器、電流傳感器、磁調制器、磁阻式和變壓器式（帶調節功能），電流檢測范圍可編程設置在 5mA 至 2500A 之間，可用于測量交流或直流電流。