A3972SB屬于集成電路（IC）的電機驅動器控制器。由Allegro MicroSystems制造生產的A3972SB電機驅動器，控制器產品屬于電機驅動器和控制器電源管理集成電路 (PMIC) 系列，可用于控制或操作從某電源施加到電機或相關機電執行器的電源。所實現的具體功能和特性集根據預期負載和預期應用的特性有很大差異，范圍從用于有刷電機的簡單開環速度控制到基于步進電機的高級閉環運動控制。

DUAL DMOS FULL-BRIDGE MICROSTEPPING PWM MOTOR DRIVER

Designed for pulse-width modulated (PWM) current control of bipolar microstepping stepper motors, the A3972SB is capable of continuous output currents to ±1.5 A and operating voltages to 50 V. Internal fixed off-time PWM current-control timing circuitry can be programmed via a serial interface to operate in slow, fast, and mixed current-decay modes.

The desired load-current level is set via the serial port with two 6-bit linear DACs in conjunction with a reference voltage. The six bits of control allow maximum flexibility in torque control for a variety of step methods, from microstepping to full-step drive. Load current is set in 1.56 increments of the maximum value.

FEATURES

■ ±1.5 A, 50 V Continuous Output Rating

■ Low rDS(on) DMOS Output Drivers

■ Optimized Microstepping via 6-Bit Linear DACs

■ Programmable Mixed, Fast, and Slow Current-Decay Modes

■ 4 MHz Internal Oscillator for Digital Timing

■ Serial-Interface Controls Chip Functions

■ Synchronous Rectification for Low Power Dissipation

■ Internal UVLO and Thermal Shutdown Circuitry

■ Crossover-Current Protection

■ Precision 2 V Reference

■ Inputs Compatible with 3.3 V or 5 V Control Signals

■ Sleep and Idle Modes