特性 Features

■Threaded barrel, M12 x 1

■Stainless steel, 1.4301

■DC 3-wire, 10…30 VDC

■NC/NO parametrizable with teach adapter

VB2‐SP1

■M12 x 1 male connector

Functional principle

The weld sensors are available in different

versions, with different signal intensities

and diameters. Ferromagnetic parts which

differ strongly in their material properties and

diameters can thus be detected. A target part

has to be located within the so called sensitive

area in order to be detected. The internal

sensor signal reaches the maximum intensity if

the sensitive area is completely covered by the

target. Partial coverage is also possible.

Sensitive area S = 9 mm

Within this area the sensor signal changes

when components are connected.

Maximum range M = 13 mm

In case of complete coverage of the sensitive

area the maximum signal intensity is achieved.