描述 Description

?

?Allegro MicroSystems recommends?APS12400?for all new Automotive 2-wire Hall-Effect latch IC designs.

The A1244 is a two-wire Hall-effect latch. The devices are produced on the Allegro advanced BiCMOS wafer fabrication process, which implements a patented high-frequency, 4-phase, chopper stabilization technique. This technique achieves magnetic stability over the full operating temperature range, and eliminates offsets inherent in devices with a single Hall element that are exposed to harsh application environments.

Two-wire latches are particularly advantageous in cost-sensitive applications because they require one less wire for operation versus the more traditional open-collector output switches. Additionally, the system designer inherently gains diagnostics because there is always output current flowing, which should be in either of two narrow ranges. Any current level not within these ranges indicates a fault condition.

The Hall-effect latch will be in the high output current state in the presence of a magnetic south polarity field of sufficient magnitude and will remain in this state until a sufficient north polarity field is present.

The device is offered in two package styles. The LH is a SOT-23W style, miniature low-profile package for surface-mount applications. The UA is a 3-pin ultra-mini single inline package (SIP) for through-hole mounting. Both packages are lead (Pb) free, with 100% matte-tin leadframe plating.

特性 Features

? AEC-Q100 automotive qualified
? High-speed, 4-phase chopper stabilization
? Low switchpoint drift throughout temperature range
? Low sensitivity to thermal and mechanical stresses

? On-chip protection
? Supply transient protection
? Reverse-battery protection

? On-board voltage regulator
? 3 to 24 V operation

? Solid-state reliability
? Robust EMC and ESD performance
? Industry-leading ISO 7637-2 performance through use of proprietary, 40 V clamping structures

簡介

A1244屬于傳感器變送器的磁性傳感器-開關（固態）。由制造生產的A1244磁性傳感器 - 開關（固態）該系列產品使用固態技術來檢測是否存在超過某個特定幅度和/或標示的磁場，并提供指示是否存在此類磁場的雙態輸出。它們與磁簧開關以及線性或羅盤型固態器件不同，前者通過使用移動機械部件來提供類似的功能，后者提供指示所施加磁場的強度和/或方向的可變輸出。