描述 Description

This device is no longer in production. The device should not be purchased for new design applications. Samples are no longer available. Date of status change: October 31, 2011.

Recommended substitution: For existing customer transition, and for new customers or new applications, contact Allegro Sales.

The A1184 device is a standard, two-wire, unipolar, Hall-effect switch. The operate point, BOP, can be field-programmed, after final packaging of the sensor and placement into the application. This advanced feature allows the optimization of the sensor switching performance, by effectively accounting for variations caused by mounting tolerances for the device and the target magnet.

This family of devices are produced on the Allegro MicroSystems advanced BiCMOS wafer fabrication process, which implements a patented, high-frequency, chopper-stabilization technique that achieves magnetic stability and eliminates the offsets that are inherent in single-element devices exposed to harsh application environments. Commonly found in a number of automotive applications, the A1184 is utilized to sense: seat track position, seat belt buckle presence, hood/trunk latching, and shift selector position.

Two-wire unipolar switches are particularly advantageous in price-sensitive applications, because they require one less wire than the more traditional open-collector output switches. Additionally, the system designer gains inherent diagnostics because output current normally flows in either of two narrowly-specified ranges. Any output current level outside of these two ranges is a fault condition. The A1184 also features on-chip transient protection, and a Zener clamp to protect against overvoltage conditions on the supply line.

The output current of the A1184 switches HIGH in the presence of a south polarity magnetic field of sufficient strength; and switches LOW otherwise, including when there is no significant magnetic field present.

Both devices are offered in two package styles: LH, a SOT-23W miniature low-profile package for surface-mount applications, and UA, a three-lead ultramini Single Inline Package (SIP) for through-hole mounting. Each package is available in a lead (Pb) free version (suffix, –T) with 100% matte tin plated leadframe.

Also see: A1180, A1181, A1182, A1183, A1185, and A1186.

特性 Features

? Chopper stabilization

? Low switchpoint drift over operating temperature range
? Low stress sensitivity
? Field-programmable for optimized switchpoints
? On-chip protection

? Supply transient protection
? Reverse-battery protection
? On-board voltage regulator
? 3.5 to 24 V operation

簡介

A1184屬于傳感器變送器的磁性傳感器-開關（固態）。由制造生產的A1184磁性傳感器 - 開關（固態）該系列產品使用固態技術來檢測是否存在超過某個特定幅度和/或標示的磁場，并提供指示是否存在此類磁場的雙態輸出。它們與磁簧開關以及線性或羅盤型固態器件不同，前者通過使用移動機械部件來提供類似的功能，后者提供指示所施加磁場的強度和/或方向的可變輸出。