描述 Description

The 8T39S11A is a high-performance clock fanout buffer. The input

clock can be selected from two differential inputs or one crystal input.

The internal oscillator circuit is automatically disabled if the crystal

input is not selected. The crystal pin can be driven by a single-ended

clock.The selected signal is distributed to ten differential outputs

which can be configured as LVPECL, LVDS or HSCL outputs. In

addition, an LVCMOS output is provided. All outputs can be disabled

into a high-impedance state.

The device is designed for a signal fanout of high-frequency, low

phase-noise clock and data signal. The outputs are at a defined level

when inputs are open or tied to ground. It is designed to operate from

a 3.3V or 2.5V core power supply, and either a 3.3V or 2.5V output

operating supply

特性 Features

? Two differential reference clock input pairs

? Differential input pairs can accept the following differential input

levels: LVPECL, LVDS, HCSL, HSTL or Single Ended

? Crystal Input accepts 10MHz to 40MHz Crystal or Single Ended

Clock

? Maximum Output Frequency

LVPECL - 2GHz

LVDS - 2GHz

HCSL - 250MHz

LVCMOS - 250MHz

? Two banks, each has five differential output pairs that can be

configured as LVPECL or LVDS or HCSL

? One single-ended reference output with synchronous enable to

avoid clock glitch

? Output skew: 80ps (maximum)

(Bank A and Bank B at the same output level)

? Part-to-part skew: 200ps (typical)

? Additive RMS phase jitter @ 156.25MHz:

5.6fs RMS (10kHz - 1 MHz), typical @ 3.3V/ 3.3V

34.7fs RMS (12kHz - 20MHz), typical @ 3.3V/ 3.3V

? Supply voltage modes:

VDD/VDDO

3.3V/3.3V

3.3V/2.5V

2.5V/2.5V

? -40°C to 85°C ambient operating temperature

? Lead-free (RoHS 6) packaging