The 8XC196NT 16-bit microcontroller is a high performance member of the MCSé 96 microcontroller family. The 8XC196NT is an enhanced 8XC196KR device with 1 Mbyte of linear address space, 1000 bytes of register RAM, 512 bytes of internal RAM, 20 MHz operation and an optional 32 Kbytes of OTPROM. Intel’s CHMOS III-E process provides a high performance processor along with low power consumption.

Ten high-speed capture/compare modules are provided. As capture modules event times with 200 ns resolution can be recorded and generate interrupts. As compare modules events such as toggling of a port pin, starting an A/D conversion, pulse width modulation, and software timers can be generated. Events can be based on the timer or up/down counter.

■ 20 MHz Operation

■ High Performance CHMOS 16-Bit CPU

■ Up to 32 Kbytes of On-Chip OTPROM

■ Up to 1 Kbyte of On-Chip Register RAM

■ Up to 512 Bytes of Internal RAM

■ Register-Register Architecture

■ 4 Channel/10-Bit A/D with Sample/Hold

■ 37 Prioritized Interrupt Sources

■ Up to Seven 8-Bit (56) I/O Ports

■ Full Duplex Serial I/O Port

■ Dedicated Baud Rate Generator

■ Interprocessor Communication Slave Port

■ Selectable Bus Timing Modes for Flexible External Memory Interfacing

■ Oscillator Fail Detection Circuitry

■ High Speed Peripheral Transaction Server (PTS)

■ Two Dedicated 16-Bit High-Speed Compare Registers

■ 10 High Speed Capture/Compare (EPA)

■ Full Duplex Synchronous Serial I/O Port (SSIO)

■ Two Flexible 16-Bit Timer/Counters

■ Quadrature Counting Inputs

■ Flexible 8-/16-Bit External Bus (Programmable)

■ Programmable Bus (HOLD/HLDA)

■ 1.4 ms 16 x 16 Multiply

■ 2.4 ms 32/16 Divide

■ 68-Pin Package