1. General description

The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D), clock

(CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that

meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in

the flip-flop and appear at the Q output. Inputs can be driven from either 3.3 V or 5 V devices. This

feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments.

Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times.

This device is fully specified for partial power down applications using IOFF. The IOFF circuitry

disables the output, preventing the potentially damaging backflow current through the device when

it is powered down.

2. Features and benefits

? Wide supply voltage range from 1.65 V to 5.5 V

? Overvoltage tolerant inputs to 5.5 V

? High noise immunity

? ±24 mA output drive (VCC = 3.0 V)

? CMOS low power consumption

? Direct interface with TTL levels

? IOFF circuitry provides partial Power-down mode operation

? Latch-up performance exceeds 250 mA

? Complies with JEDEC standard:

? JESD8-7 (1.65 V to 1.95 V)

? JESD8-5 (2.3 V to 2.7 V)

? JESD8-B/JESD36 (2.7 V to 3.6 V)

? ESD protection:

? HBM JESD22-A114F exceeds 2000 V

? MM JESD22-A115-A exceeds 200 V

? Multiple package options

? Specified from -40 °C to +85 °C and -40 °C to +125 °C