最新无码a∨在线观看,一本av高清一区二区三区,亚洲熟妇色l20p,宅男噜噜69av,中出あ人妻熟女中文字幕

74HCT4852PW-Q100

Dual 4-channel analog multiplexer/demultiplexer with injection-current effect control

Generaldescription The74HC4852-Q100;74HCT4852-Q100arehigh-speedSi-gateCMOSdevicesandarespecifiedincompliancewithJEDECstandardno.7A. Theinjection-currenteffectcontrolallowssignalsatdisabledanaloginputchannelstoexceedthesupplyvoltagewithoutaffectingthesignalof

74HCT4852PW-Q100

Dual 4-channel analog multiplexer/demultiplexer with injection-current effect control; ? Automotive product qualification in accordance with AEC-Q100 (Grade 1)? Specified from -40 °C to +85 °C and from -40 °C to +125 °C\n\n? Injection-current cross coupling < 1 mV/mA\n? Wide supply voltage range from 2.0 V to 6.0 V for 74HC4852-Q100\n? ESD protection:? MIL-STD-883, method 3015 exceeds 2000 V\n? HBM JESD22-A114F exceeds 2000 V\n? MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)\n\n? Latch-up performance exceeds 100 mA per JESD 78 Class II level A\n? Low ON-state resistance:? 400 Ω (typical) at VCC = 2.0 V\n? 215 Ω (typical) at VCC = 3.0 V\n? 120 Ω (typical) at VCC = 3.3 V\n? 76 Ω (typical) at VCC = 4.5 V\n? 59 Ω (typical) at VCC = 6.0 V\n\n;

The 74HC4852-Q100; 74HCT4852-Q100 are high-speed Si-gate CMOS devices and are specified in compliance with JEDEC standard no. 7A.\n The 74HC4852-Q100; 74HCT4852-Q100 are dual 4-channel analog multiplexers/demultiplexers with common select inputs (S0 and S1). Both multiplexers have a common active LOW enable input (E), four independent inputs/outputs (nY0 to nY3) and two common inputs/outputs (1Z, 2Z). The devices feature injection-current effect control, which has excellent value in automotive applications where voltages in excess of the supply voltage are common.\n With E LOW, two of the eight switches are selected (low impedance ON-state) by S0 and S1. With E HIGH, all switches are in the high-impedance OFF-state, independent of S0 and S1.\n The injection-current effect control allows signals at disabled analog input channels to exceed the supply voltage without affecting the signal of the enabled analog channel. This eliminates the need for external diode/resistor networks typically used to keep the analog channel signals within the supply-voltage range.\n This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.\n