1. General description

The 74AUP1G175 is a single positive edge triggered D-type flip-flop with individual data (D), clock

(CP), master reset (MR) inputs, and Q output. The D-input that meets the set-up and hold time

requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the

Q output. A LOW on MR causes the flip-flop and output to be reset to LOW. Schmitt-trigger action

at all inputs makes the circuit tolerant of slower input rise and fall times. This device ensures very

low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V. This

device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables

the output, preventing the potentially damaging backflow current through the device when it is

powered down.

2. Features and benefits

? Wide supply voltage range from 0.8 V to 3.6 V

? High noise immunity

? CMOS low power dissipation

? Complies with JEDEC standards:

? JESD8-12 (0.8 V to 1.3 V)

? JESD8-11 (0.9 V to 1.65 V)

? JESD8-7 (1.2 V to 1.95 V)

? JESD8-5 (1.8 V to 2.7 V)

? JESD8C (2.7 V to 3.6 V)

? ESD protection:

? HBM JESD22-A114F Class 3A exceeds 5000 V

? MM JESD22-A115-A exceeds 200 V

? CDM JESD22-C101E exceeds 1000 V

? Low static power consumption; ICC = 0.9 μA (maximum)

? Latch-up performance exceeds 100 mA per JESD 78 Class II

? Overvoltage tolerant inputs to 3.6 V

? Low noise overshoot and undershoot < 10 of VCC

? IOFF circuitry provides partial Power-down mode operation

? Multiple package options

? Specified from -40 °C to +85 °C and -40 °C to +125 °C