74ACT16541DL屬于集成電路（IC）的緩沖器驅動器接收器收發器。由美國德州儀器公司制造生產的74ACT16541DL緩沖器，驅動器，接收器，收發器邏輯緩沖器、驅動器、接收器和收發器允許隔離對某個電路的邏輯信號的訪問，以用于另一電路。緩沖器將其輸入信號（不變或反相）傳遞到其輸出，并可能用于清除弱信號或驅動負載。在布爾邏輯仿真器中，緩沖器主要用于增加傳播延遲。邏輯接收器和收發器允許在數據總線之間進行隔離通信。

Members of the Texas Instruments

WidebusE Family

Inputs Are TTL-Voltage Compatible

Flow-Through Architecture Optimizes

PCB Layout

Distributed VCC and GND Pin Configuration

Minimizes High-Speed Switching Noise

EPICE (Enhanced-Performance Implanted

CMOS) 1-mm Process

500-mA Typical Latch-Up Immunity at

125°C

Package Options Include Plastic 300-mil

Shrink Small-Outline (DL) Packages Using

25-mil Center-to-Center Pin Spacings and

380-mil Fine-Pitch Ceramic Flat (WD)

Packages Using 25-mil Center-to-Center

Pin Spacings

description

The ’ACT16541 are noninverting 16-bit buffers

composed of two 8-bit sections with separate

output-enable signals. For either 8-bit buffer

section, the two output-enable (1OE1 and 1OE2

or 2OE1 and 2OE2) inputs must both be low for

the corresponding Y outputs to be active. If either

output-enable input is high, the outputs of that

8-bit buffer section are in the high-impedance

state.

The 74ACT16541 is packaged in TI’s shrink small-outline package, which provides twice the I/O pin count and

functionality of standard small-outline packages in the same printed-circuit-board area.

The 54ACT16541 is characterized for operation over the full military temperature range of –55°C to 125°C. The

74ACT16541 is characterized for operation from –40°C to 85°C.