74ACT16373DLRG4屬于集成電路（IC）的鎖存器。由美國德州儀器公司制造生產的74ACT16373DLRG4鎖存器鎖存器是類似于觸發器的基本數字存儲設備，但是不同之處在于，在鎖存使能（或類似命名）信號處于有效邏輯狀態的任何時間，保持的邏輯狀態都可以改變?！巴该鳌辨i存器還允許設備輸出在鎖存使能信號有效時反映輸入的當前狀態，而相反的是，狀態僅在保持狀態已固定時改變。

Members of the Texas Instruments

Widebus Family

Inputs Are TTL-Voltage Compatible

3-State Bus Driving True Outputs

Full Parallel Access for Loading

Flow-Through Architecture Optimizes

PCB Layout

Distributed VCC and GND Pin Configuration

Minimizes High-Speed Switching Noise

EPIC (Enhanced-Performance Implanted

CMOS) 1-m Process

500-mA Typical Latch-Up Immunity at

125°C

Package Options Include Shrink

Small-Outline (DL) 300-mil Packages Using

25-mil Center-to-Center Pin Spacings and

380-mil Fine-Pitch Ceramic Flat (WD)

Packages Using 25-mil Center-to-Center

Pin Spacings

description

The SN54ACT16373 and 74ACT16373 are 16-bit

D-type transparent latches with 3-state outputs

designed specifically for driving highly capacitive

or relatively low-impedance loads. They are

particularly suitable for implementing buffer

registers, I/O ports, bidirectional bus drivers, and

working registers. These devices can be used as

two 8-bit latches or one 16-bit latch. The Q outputs

of the latches follow the data (D) inputs if enable

C is taken high. When C is taken low, the Q outputs

are latched at the levels set up at the D inputs.

A buffered output-enable (OE) input can be used to place the outputs in either a normal logic state (high or low

logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the

bus lines significantly. The high-impedance state and the increased drive provide the capability to drive bus lines

in a bus-organized system without need for interface or pullup components.

OE does not affect the internal operations of the latches. Old data can be retained or new data can be entered

while the outputs are in the high-impedance state.

The 74ACT16373 is packaged in TI’s shrink small-outline package, which provides twice the I/O pin count and

functionality of standard small-outline packages in the same printed-circuit-board area.

The SN54ACT16373 is characterized for operation over the full military temperature range of ?55°C to 125°C.

The 74ACT16373 is characterized for operation from ?40°C to 85°C.