■ A special software (function module) for integration in PLC systems is not required.

■ 8 byte user data per read/write cycle

■ LEDs indicate status and diagnostic

■ Electronics galvanically separated from the

field level via optocouplers

■ Connection of two BL ident read/write

heads

■ Mixed operation of HF and UHF read/write

heads

■ Transmission rate: 115.2 kbps

■ Cable length max. 50 m

Functional principle

BL ident can be integrated into your plant

structure in many different ways.

Various fieldbus standards such as

PROFIBUS-DP, EtherNet/IP, Ethernet Modbus

TCP, DeviceNet, CANopen und PROFINET IO

enable a flexible integration.

BL ident simple electronic modules

(BL20-2RFID-S, BL67-2RFID-S) can be integrated into existing control or host systems

without function block, since standard input/output process data is used for communication.

Programmable gateways with peripheral preprocessing function to relieve the higher-level

control and bus system.

Preassembled sets (2, 4, 6 or 8-port), easily

mounted, available for all fieldbus networks.