622002115121屬于連接器互連器件的分路器跳線。由伍爾特集團制造生產的622002115121分路器，跳線分路器或跳線旨在連接兩個隔開一定距離的引腳觸頭以實現電氣連接。類型有頂部封閉/夾緊、絕緣、非絕緣和頂部開放/夾緊，間距為 0.050" (1.27 mm) 至 1.00" (25.40 mm)，針腳數從 1 (1 x 1) 到 48 (1 x 24) 或 4 (2 x 2) 到 26 (2 x 13) 不等。

General:

? This mechanical component is designed and manufactured for use in general electronic equipment.

? Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any

equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control,

ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are

especially required and/or if there is the possibility of direct damage or human injury.

? Mechanical components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer.

? The mechanical component is designed and manufactured to be used within the datasheet specified values. If the usage and operation

conditions specified in the datasheet are not met, the component may be damaged or dissolved.

? Do not drop or impact the components, the component may be damaged.

? Prevent any damage or scratches on the component, especially on the actuator.

? Direct mechanical impact to the product shall be prevented (e.g overlapping of the PCB′s).

? Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth

Elektronik does not warrant any customer qualified product characteristics beyond Würth Elektroniks’ specifications, for its validity and

sustainability over time.

? The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the

authority of the customer. All technical specifications for standard products do also apply to customer specific products.

? The mechanical component is designed to be used along with Würth Elektronik counterparts and tools. Würth Elektronik cannot ensure

the reliability of these components while being used with other products.