描述 Description

Unit disconnects non-critical loads when battery voltage falls

below threshold, reconnects when battery is recharged.

Unit is auto-ranging: identifies whether system is 12V or 24V,

and automatically establishes thresholds. One part number;

two voltages.

Eliminates dead battery service calls and lost time by

extending battery life and preventing irreversible damage

due to excessive discharge.

No action is required by vehicle operator to protect the

batteries – unit automatically disconnects and reconnects,

giving operator a warning one minute before disconnect.

200mA alarm signal can drive audible or visual systems or any

large device via a relay. Optional manual override feature.

Electronics are sealed to IP67, see Installation Instructions

IF-162 for mounting and wiring details. Solid state reliability

and resistance to vibration – replaces vulnerable conventional

solenoids. Unit exceeds one million cycles and is protected

from overcurrent, overvoltage, and under-voltage. Minimal

draw on battery (only 1mA standby).

Protects vulnerable onboard electronics such as GPS, phone,

computer. Solid-state switching creates less electrical noise

and interference, and eliminates spikes.

Features and Benefits

? Electronically senses battery level and conserves

starting power

? Prolongs battery life by preventing battery damage.

? Unit works with 12V or 24V DC systems