1 Features

? Up and down translation across 1.65 V to 3.6 V

? AEC-Q100 automotive qualified

? Operating temperature grade 1: –40°C to +125°C

? Maximum quiescent current (ICCA + ICCB) of 14 μA

(125°C maximum)

? Up to 100 Mbps support across the full supply

range

? VCC Isolation Feature

– If either VCC input is below 100 mV, the output

becomes high-impedance

? Ioff supports partial-power-down mode operation

? Latch-up performance exceeds 100 mA per JESD

78, Class II

? ESD protection exceeds JEDEC JS-001

– 2000-V human body model

– 1000-V charged-device model

2 Applications

? MCU/FPGA/processor GPIO translation

? Communications modules to processor translation

? Push-pull I/O buffering

3 Description

The AEC-Q100 qualified 2N7001T-Q1 device is a

single-bit buffered voltage signal converter that uses

two separate configurable power-supply rails to up or

down translate a unidirectional signal. The device is

operational with both VCCA and VCCB supplies down

to 1.65 V and up to 3.60 V. VCCA defines the input

threshold voltage on the A input. VCCB defines the

output drive voltage on the B output.

This device is fully specified for partial-power-down

applications using the Ioff current. The Ioff protection

circuitry ensures that no excessive current is drawn

from or to an input, output, or combined I/O that

is biased to a specific voltage while the device is

powered down.

The VCC isolation feature ensures that if either VCCA

or VCCB is less than 100 mV, the output port (B) enters

a high-impedance state.