2CG010DBC11N屬于集成電路（IC）的柵極驅動器。由TAMURA Corporation.制造生產的2CG010DBC11N柵極驅動器柵極驅動器電源管理集成電路 (PMIC) 可用于提供隔離、放大、參考位移、自舉或其他必要功能，這些功能可將來自電源轉換應用中控制設備的信號連接到電源被控制通過的半導體設備（通常為 FET 或 IGBT）。任何特定設備提供的確切功能各不相同，但與它適合驅動的半導體配置相關。

■Features

?Ideal for drive of IGBT

?Gate voltage : +15V/-10V

?ALL-IN-ONE (Built-in isolated DC / DC converter and gate drive circuit)

?Low parasitic capacitance (about 12pF) ; highly resistant to common-mode noise.

?Fast response : about 100nsec(typ)

?The isolation for primary-secondary signal used fast response isolator.

?Input-to-Output dielectric withstand voltage : AC5000V

?Output CH1-to-Ouput CH2 dielectric withstand voltage : AC4000V

?Input-to-Output insulation distance : 14mm (clearance), 16mm(creepage） (As for Gate driver module PCB)

?Output CH1-to-Output CH2 insulation distance : 7mm (clearance), 12mm(creepage）

?DC/DC converter input voltage :13～28V

?Signal input voltage : 3.3V,5V

?Overload protection (DC/DC converter)

?Overheat protection (DC/DC converter)

?Half bridge mode (Gate drive circuit)

?Desaturation protection (Gate drive circuit)

?Soft turn-off function (Gate drive circuit)

?Fault signal output function (Gate drive circuit)

?Active clamp function (Gate drive circuit)

?Under-voltage lockout(UVLO) (Gate drive circuit)

?Insulating moistureproof coating

?Safety standards：UL508(file no.E243511) (DC/DC converter only)

?Reinforced isolation according to IEC 60664-1 (IEC61800-5-1, IEC62477-1, IEC62109-1, etc.)

?UL compliant (UL1741, UL508, etc.)

■Application

Industrial inverter, power conditioner, etc …